Linksys Linksys MR8300 Reviews routers Tech Velop VPN

Linksys Max-Stream AC2200 MR8300 review that you need to read right now


Is the Linksys MR8300 value your cash or do you have to go together with TP-Hyperlink? Learn on.


  • Simply manageable
  • The set up course of is straightforward
  • All through is strong
  • Presents Velop mesh know-how
  • Helps MU-MIMO know-how


  • Parental controls are restricted
  • Lack of built-in safety towards malware
  • Disabled USB port


The brand new Linksys MR8300 is the newest within the lengthy line of tri-band WiFi routers from Linksys. 

And if you pair it with the brand new Velop node the brand new Linksys MR8300 is ready to type an entire mesh community as properly. 

Our analysis exhibits that it has a strong efficiency in virtually all areas the place you’d need a good router to carry out. 

With that stated, it’s also true that it lacks a number of the important options that good routers supply akin to respectable parental management elements and malware safety. 


Linksys Max-stream AC2200 full evaluation

From the seems to be of it, you wouldn’t contemplate the Linksys MR8300 router (which prices round $179.99) as something however your run-of-the-mill router. 

Certainly, in some ways, the brand new Linksys MR8300 WiFi router is a typical WiFi router. 

The Linksys MR8300 comes with a number of exterior antennas and gives customers a number of LAN ports. 

Furthermore, it has a reasonably conventional router type issue as nicely. 

However, it additionally gives customers the brand new Velop mesh know-how. 


This can be a know-how that permits customers to construct, from the bottom up, full residence WiFi techniques. 

And all they should use for that function is Linksys’ Velop nodes. 

Now, there’s nothing stopping you from utilizing the brand new Linksys MR83300 as a single particular person unit, you do have the choice of hooking the router as much as any given Velop node with a purpose to entry all the advantages that a mesh community brings to the desk. 

We’re speaking about advantages comparable to, 

  • Seamless roaming
  • Straightforward administration
  • Onet community password and SSDI

As talked about on the prime as nicely, the Linksys MR8300 is a strong and powerful performer. 

However towards the likes of TP-Hyperlink Deco (AC 2200 Sensible Mesh WiFi system) M9 and others, it merely doesn’t have the power to match both the efficiency or the options. 

Router or a mesh system? 

Is determined by what you need. 

As alluded to earlier than, the MR8300 seems fairly just like the sooner EA8300 mannequin which got here out final yr. 

The MR8300 measures 2.1 inches by eight.four inches by 6.three inches (peak x width x depth). 

Furthermore, it has a textured black end. 

As for the antennas, it has 4 of them and all are non-removable however adjustable. 

The highest of this router has a shiny black panel. 

It makes use of a uni-color LED to be able to let the consumer know what’s going on at a given second. 

If the sunshine is blinking and is blue then that signifies that the Linksys router goes by way of the method of beginning up. 

If the only LED is giving off a strong purple vibe then meaning it has made preparation for the setup course of. 

If the sunshine is blinking and is purple in colour then meaning the set up setup is presently in progress. 

The LED mild turns strong blue when it has efficiently managed to hook up with the web and can also be able to get to work. 

This similar LED mild turns to finish purple if in case you have misplaced any and all web entry. 

Should you look behind the router you will notice 4 gigabit LAN ports. 


There’s additionally an influence port and a WAN port together with the usual energy and reset buttons. 

One oddity that we’ve got come to know only recently is the USB port which looks like it’s reserved for one thing coming sooner or later. 

In different phrases, there isn’t a means for the consumer to utilize the USB port, with a purpose to join the router to some exterior peripherals corresponding to printers and arduous drives. 

With that stated, we’re positive that Linksys has plans to utterly rectify this drawback kind of within the close to future firmware patches or updates. 

Velocity and specs

So far as the velocity quantity is worried, because the new MR8300 is a max-stream AC2200 tri-band WiFi router, it is ready to attain speeds of near 867 Mbps on its two 5 GHz bands (that’s 867 Mbps for every one ) and 400 Mbps on its 2.four GHz band. 

So far as the processor is worried, the MR8300 comes with a quad-core CPU. 

That’s sufficient for many on-line shoppers. 

Aside from that, the router is provided with 256 MB of flash reminiscence together with 512 MB of RAM. 

Furthermore, it additionally has help for MU-MIMO (Multi Consumer-Multi Enter Multi Output)  simultaneous knowledge streaming options. 

Not solely that, there’s additionally a Sensible Join function which allows automated band-steering. 

And when you all the time needed to have a quicker WiFi connection however didn’t know learn how to get it, then the Linksys MR8300 additionally helps direct-to-signal sign beamforming which does precisely that. 

With that stated, you must know that even when you allow the Sensible Join function you’ll nonetheless have the chance to separate the obtainable bands if you need that. 

The Linksys MR8300 makes use of the corporate’s proprietary Velop mesh know-how. 

This enables customers to construct a working WiFi system simply through the use of a given Velop node. 

Nevertheless, so as to take action, the consumer has to make it possible for the Linksys MR8300 is appearing as the first (important) node which has a direct connection to the consumer’s modem. 

Now, when a consumer pairs it with the Linksys Velop AC2200 tri-band node, the router is ready to present customers as much as a complete of 4500 sq. ft of pure WiFi protection. 

This protection matches precisely with the Deco M9 Plus. 


Cellular apps

On that observe, we also needs to point out you could, if you wish to, handle your Linksys MR8300 router by making use of the official Linksys cellular software which is on the market each on the Android and iOS platforms. 

If you don’t want to try this then you can too use the online console that Linksys Sensible WiFi has made obtainable to Linksys customers. 

No matter your selection, each choices supply just about the identical set of settings. 

Nevertheless, the primary distinction between utilization is that if the consumer needs to separate the out there WiFi bands, he/she has to take action by way of the online console. 

So far as the official cellular app is worried, it’s fairly just like the one which customers have to make use of so as to handle the Plug-in and Velop Tri-band methods. 

From a design perspective, our analysis exhibits that the app is straightforward to make use of. 

Whenever you open the app, it exhibits the consumer a Dashboard display. 

The Dashboard, as anticipated, shows the identify of the present WiFi community together with the whole variety of related internet-enabled units and Web standing. 

If the consumer clicks on the WiFi tab, the app takes him/her to a brand new display the place he/she is ready to change the password and identify of the given community. 

On the identical display, there are additionally choices for altering the present safety settings and managing the WiFi mode. 

Moreover, there’s additionally a channel finder function right here that the consumer can make the most of to scan for numerous WiFi channels after which decide the one which has the least quantity of consumer visitors. 

Now, under that, there are totally different tabs for customers who need to allow parental controls and/or visitor networking. 

This tab additionally permits customers to assign system prioritization. 

For sure, the parental controls obtainable by way of this router permit the consumer to do issues resembling, 

  • Immediately cease/pause a tool’s web entry. 
  • Create and edit web entry timings/schedule
  • Block/unblock web sites however just for particular internet-enabled units. 

There are not any age-specific content material filters which you will get with another mesh methods corresponding to this router’s cousin, the brand new Linksys Velop WiFi tri-band system plus Linksys Defend and the TP-Hyperlink Deco (AC 2200 Sensible Mesh WiFi system)M9 Plus. 

On that observe, do remember that the Linksys Defend works solely with tri-band Velop techniques. 

Presently, there isn’t any method to make Linksys Defend work with the Linksys AC2200 MR8300. 

Lacking options

Let’s speak about another issues that are lacking. 

The primary is malware instruments. 

This router doesn’t supply any type of anti-malware instruments. 

That is mostly a disgrace since most Asus routers come packaged with AIProtection software program purposes. 

Fashions reminiscent of RT-AX88U and RT-AC66U B1 are the fashions it is best to control if you should purchase such routers. 

We’ve got already talked about that the Linksys MR8300 System Prioritization element allows customers to assign numerous ranges of bandwidth precedence however solely does so for a complete of three units. 

Properly, even with the function as it’s, you wouldn’t have the choice of establishing your personal thresholds and even your personal assigned precedence which can be depending on the appliance in query. 

A few of the different gadgets that you’re more likely to discover on the menu embrace, 

  • Velocity Verify which is a utility powered by Ookla which does a terrific job of measuring web obtain and add speeds. 
  • Notifications which inform the consumer when a given node has gone offline. 

Utilizing the identical menu you can even have entry to the settings labeled Router Administration to be able to, 

  • Replace router firmware
  • Set the popular time zone
  • Restart the WiFi router

There’s additionally an Superior Settings tab which presents choices similar to,

  • Port Forwarding
  • DNS settings
  • MAC filtering
  • Port Triggering

Efficiency and Set up

You should not have any issues having the brand new MR8300 up and operating inside a matter of minutes. 

All you actually need to do is to obtain the official app after which plug the WiFi router into your present trendy after which give it energy. 

You need to see the LED mild on the router glow purple inside a few seconds. 

The sunshine, as talked about earlier than as properly, will point out clearly if the router is all set for a setup course of. 

When you’re carried out with that, then you’ll need to faucet the choice that claims Setup New System. 

When you do this, the official app will take it upon itself to seek out the router. 

It should achieve this virtually instantly. 

At that time, it is best to see the LED on the tower blinking in purple shade. 

Then you’ll need to faucet the Subsequent choice in your app after which create an account when you haven’t carried out that already. 

When that’s completed then you’ll need to attend for a few seconds earlier than the official app is ready to hyperlink the present router on to your account. 

It goes with out saying that you must give your community a related password and identify mixture. 

When you achieve this, then you’ll have to watch for round 30 seconds in an effort to give time to the app to truly configure your new community. 

For instance, in case you are utilizing the brand new router in your home-based workplace then you must identify the brand new community as Workplace. 

The app ought to then immediate you so as to add some satellite tv for pc nodes. 

That’s the place you’ll need to plug within the previously-mentioned Linksys Velop AC2200 tri-band node.

After that, you’ll need to attend for round a minute or two earlier than the LED modifications its colour from blue which is blinking to a strong purple. 

As soon as that occurs that you must faucet the button that claims Subsequent. 

If in case you have finished every little thing proper to date, your router ought to discover your node virtually instantly. 

Now, as soon as you’re completed with that, you should press the Subsequent button after which wait once more for fairly some time earlier than the app provides the node to your new community. 

The official app will inform you that the node was efficiently positioned in an applicable spot. 

Give that node a related identify as properly. 

For instance, if the node is in your Dwelling Room then identify it Dwelling Room. 

At that time, you need to be completed with the setup. 

Our analysis exhibits that for those who use the brand new Linksys MR8300 as your main mesh WiFi router by making use of the brand new function referred to as automated band-steering then it is going to all the time choose the quicker and newer 5GHz band earlier than anything. 

On numerous close-proximity checks, the router could have no issues in attending to speeds of as much as 450 Mbps. 

Our analysis additionally exhibits that the Linksys MR8300 router is quicker than the Linksys Velop Plug-in router. 

Nevertheless, it’s nonetheless slower than the TP-Hyperlink Deco (AC 2200 Sensible Mesh WiFi system)M9 Plus and D-Hyperlink Covr Twin-Band router. 

In case you check it from a distance of near 30 ft then the Linksys MR8300 should not have any hassle in supplying you with a powerful velocity of 246 Mbps. 

This will sound like a drop from the same-room check that we talked about earlier than however contemplate the truth that the Linksys MR8300 nonetheless manages to beat D-Hyperlink Covr and the TP-Hyperlink Deco (AC 2200 Sensible Mesh WiFi system)M9 Plus by respectable margins. 

Evaluating the Linksys MR8300 with Linksys Velop, we now have discovered that the MR8300 outperforms it by an excellent margin as properly. 

 You’ll be able to anticipate the MR8300 to hit the 375 Mbps mark as properly once you join it to a Velop satellite tv for pc node. 

This degree of efficiency is barely behind the efficiency degree which you could get from TP-Hyperlink Deco (AC 2200 Sensible Mesh WiFi system) M9 Plus satellite tv for pc. 

Examine that with D-Hyperlink Covr node and you will see that the Linksys MR8300 beats it by a margin of round 95 Mbps.

So far as the Linksys Velop Plug-in node is worried, the Linksys MR8300 demolishes it by a margin of round 250 Mbps. 

From that context, you also needs to know that the Linksys MR8300 can’t present the identical type of efficiency when examined on the 30-foot check. 

In different phrases, our analysis exhibits that the TP-Hyperlink Deco (AC 2200 Sensible Mesh WiFi system)M9 Plus is far faster than the Linksys MR8300. 

Nevertheless, even with that efficiency degree, the Linksys MR8300 was capable of beat out competitors from the likes of Linksys Velop Plug-in and D-Hyperlink COVR nodes.

It’s any good for learners? 

We’re completely conscious of the truth that a very good variety of individuals studying this assessment wouldn’t contemplate themselves prepared for leaping into a complicated mesh community. 

No less than, not but. 

Nevertheless, we expect that the Linksys MR8300 is an effective choice for individuals who plan on rising their residence community within the coming months or years. 

In reality, we expect it’s a fairly sensible selection given the efficiency that the Linksys MR8300 may give you in comparison with a few of the different routers out there out there at present on the similar worth level. 

Sure, there isn’t any doubt about the truth that the Linksys MR8300 doesn’t present customers with the glossy aesthetics which they will get with nearly all of mesh routers on the market out there right now. 

Nevertheless, even with that, it’s a quick router and performs nicely in same-room router exams. 

Furthermore, for newbie customers, that is just about a strong selection as a result of it permits them to get it up and operating simply and shortly. 

We now have already talked about the truth that the MR8300 makes use of the Linksys Velop mesh know-how.

However for some cause, it nonetheless doesn’t help the Linksys Defend parental management options which customers can have entry to in the event that they buy the newest model of the Velop WiFi system. 

Aside from that, maybe we also needs to point out that it doesn’t supply any type of malware safety. 

The Linksys MR8300 goes to value you round $179.99. 

However, to get a Velop AC2200 node you’ll have to spend round $199.99. 

For those who do your analysis correctly, you can see that you could spend $80 lower than the worth of the MR8300 mannequin and get TP-Hyperlink Deco (AC 2200 Sensible Mesh WiFi system) M9 Plus which provides customers virtually precisely the identical WiFi protection. 

the TP-Hyperlink Deco (AC 2200 Sensible Mesh WiFi system)additionally gives customers strong anti-malware instruments and respectable parental management options. 

Furthermore, the TP-Hyperlink Deco (AC 2200 Sensible Mesh WiFi system)is just about the perfect within the enterprise with regards to efficiency numbers. 

Earlier than we overlook, the TP-Hyperlink Deco (AC 2200 Sensible Mesh WiFi system)M9 Plus router additionally supplies customers with the brand new Zigbee circuitry. 

Most of our readers would already know what that does. 

However in case you don’t, simply know that the Zigbee circuitry allows routers like TP-Hyperlink Deco (AC 2200 Sensible Mesh WiFi system) M9 Plus to regulate numerous house automation digital units. 

That’s simply one of many explanation why lots of people rank the TP-Hyperlink Deco (AC 2200 Sensible Mesh WiFi system)over the Linksys MR8300. 

We’re not saying that the Linksys MR8300 is garbage when put in entrance of TP-Hyperlink Deco (AC 2200 Sensible Mesh WiFi system).
What we’re saying is that you must know extra concerning the router that you simply plan on buying and examine totally different fashions completely earlier than making the ultimate determination. 

Do you’ve got one thing so as to add concerning the new Linksys MR8300? 

Did we miss an essential piece of details about this router? 

In that case, then all it’s a must to do is to make use of the feedback part under to tell us about it. 

Additionally, don’t hesitate to tell us your opinion on this router. 

When you have made this far, then you have got fairly properly for your self. 

For now, we’re all ears. 

So speak to us through the use of the feedback part under. 

Additionally, to maintain up to date on the newest happenings on the earth of latest router fashions, do bookmark Safety Gladiators. 




Zohair is at present a content material crafter at Safety Gladiators and has been concerned within the know-how business for greater than a decade. He’s an engineer by coaching and, naturally, likes to assist individuals remedy their tech associated issues. When he isn’t writing, he can often be discovered training his free-kicks within the floor beside his home.


Newest posts by Zohair (see all)